Telecom Cabinet
Cable
Raised Floor
Cabling Ladder
Grounding
Power
Camera
Door Locker
Smoke Sensor
False Ceiling
Lighting
Rack Fan
4 Fan Shelf Cooling Unit Fits
2. The specification and technical parameter * Running environment: -5 oC ~ 50 oC * Relative humidity:20%~85% (dew dont be formed) * Main technical parameter The voltage of the power: 220 VAC±10% (110VAC is optional) * Measuring Scale: 0 oC ~ 50 oC * Capacity of connective point of relay: 7A/250 VAC * Span of control: 0 oC ~ 50 oC *Precision of controlling and measuring: ±1 oC
3. Surface dimension and explanation of each part temperature controller switch power input sensor tie-in (connect) power output (1) power output (2)
4. Connection /wiring Steps Connect the temperature sensor to the sensor of temperature controlling unit. Connect the outside power to the power plug of temperature controlling unit with special cable
5. Operation When complete all the connection steps above and confirm the connection is ok, then turn on the switch on the temperature controller and adjust the control parameter to appropriate temperature.
6. Operation of the temperature controller Look over and set parameter
(A)Look over parameter. Under the state of non-setting, pressing key show setting value of temperature. Pressing key display the different between the present temperature and temperature located, 2 seconds later, the screen will show the present temperature.
(B)Set parameter * method of entering into the state of customer setting: under not-setting state. Press SET key longer than 5 seconds to enter customer state of setting up, setting indicator to be on and to show the temperature at present.
* method of temperature setting :under the state of customer setting , press upwards or downwards to adjust the temperature .Press one time to adjust 1 degree. It will be changed into rapgoods_id adjusting after pressing on it over 2 seconds.
*The method of exit from the state of customer setting Press SET key 5 seconds or no any operation within 30 second under state of customer setting, system will store current setting, value and return to normal working condition.
*Method of entering administrators menu: under state of non-setting, pressing SET and over 5 seconds at the same time to enter administrators menu Then setting light will be on to show the item: F1 to setting.
Feature 1.Raising Electronics Rack Mount Fan - Solid, Versatile and Premium Quality, protect rack mount equipment from overheating,performance issues, and shortened life spans.
2.This 1U rack mount cooling unit with 4 fans is designed for applications that requires high volume cooling inside server or network cabinets.
3.It mounts to any standard 19' installation cabinets and racks to provide a maximum airflow in your mission critical server systems.
4.It can be mount either at the Top or Bottom of the your cabinets or racks. Also, if you would like to mount it in between your equipment, it is going to perform well too. The air flows from the unit bottom to top.
5.Operates at a quiet noise level(from 42-48dBA) making it perfect for the server room or within your office space.
Application It is suitable for 19" Cabinet Rack, Server Cabinet, Server Rack Cabinet, Network Cabinet Rack, Enclosure Cabinet Rack, Server Rack Cabinets, 4 Post Cabinet Rack, Data Cabinets Rack and Zone 4 Cabinet.
2. The specification and technical parameter * Running environment: -5 oC ~ 50 oC * Relative humidity:20%~85% (dew dont be formed) * Main technical parameter The voltage of the power: 220 VAC±10% (110VAC is optional) * Measuring Scale: 0 oC ~ 50 oC * Capacity of connective point of relay: 7A/250 VAC * Span of control: 0 oC ~ 50 oC *Precision of controlling and measuring: ±1 oC
3. Surface dimension and explanation of each part temperature controller switch power input sensor tie-in (connect) power output (1) power output (2)
4. Connection /wiring Steps Connect the temperature sensor to the sensor of temperature controlling unit. Connect the outside power to the power plug of temperature controlling unit with special cable
5. Operation When complete all the connection steps above and confirm the connection is ok, then turn on the switch on the temperature controller and adjust the control parameter to appropriate temperature.
6. Operation of the temperature controller Look over and set parameter
(A)Look over parameter. Under the state of non-setting, pressing key show setting value of temperature. Pressing key display the different between the present temperature and temperature located, 2 seconds later, the screen will show the present temperature.
(B)Set parameter * method of entering into the state of customer setting: under not-setting state. Press SET key longer than 5 seconds to enter customer state of setting up, setting indicator to be on and to show the temperature at present.
* method of temperature setting :under the state of customer setting , press upwards or downwards to adjust the temperature .Press one time to adjust 1 degree. It will be changed into rapgoods_id adjusting after pressing on it over 2 seconds.
*The method of exit from the state of customer setting Press SET key 5 seconds or no any operation within 30 second under state of customer setting, system will store current setting, value and return to normal working condition.
*Method of entering administrators menu: under state of non-setting, pressing SET and over 5 seconds at the same time to enter administrators menu Then setting light will be on to show the item: F1 to setting.
Feature 1.Raising Electronics Rack Mount Fan - Solid, Versatile and Premium Quality, protect rack mount equipment from overheating,performance issues, and shortened life spans.
2.This 1U rack mount cooling unit with 4 fans is designed for applications that requires high volume cooling inside server or network cabinets.
3.It mounts to any standard 19' installation cabinets and racks to provide a maximum airflow in your mission critical server systems.
4.It can be mount either at the Top or Bottom of the your cabinets or racks. Also, if you would like to mount it in between your equipment, it is going to perform well too. The air flows from the unit bottom to top.
5.Operates at a quiet noise level(from 42-48dBA) making it perfect for the server room or within your office space.
Application It is suitable for 19" Cabinet Rack, Server Cabinet, Server Rack Cabinet, Network Cabinet Rack, Enclosure Cabinet Rack, Server Rack Cabinets, 4 Post Cabinet Rack, Data Cabinets Rack and Zone 4 Cabinet.
